That was definitively one of the worst couple of months of my life...
Between encountering some major emotional problems and trying to find a real way out of past troubles my personal life seems to be thorn to shreds...
That was main reason that no post were published and hardly anything painted...
Out of things that I actually menage to do was attending to Grey seer painting competition with my friends on which i took gold in Single Sci-Fi with Dark Eldar Wych it was really hard to make good photos due to the pose .
I hope everything will get better from now on and i can post few new things in a few weeks span.
Saturday, September 10, 2011
Saturday, June 18, 2011
Terminator Wolf Guard
Photo of the mini i was painting some time ago and recently found some inspiration to finish him and also to do the wolf paw freehand on the display base.
Hope You like him
You can find more pics here
Hope You like him
You can find more pics here
Friday, June 17, 2011
Update
I'we been busy lately switching between painting minis and trying to finish studies.. i have my bachelor exam in 3 weeks so i'll hardly update my blog by this time.
Here are few sneak peaks of what I'm doing
First is a seer council on jet bikes for Eldar army
Second are bits for Kromlech a wide variety of orc heads and other bits. Be sure to check it for more interesting stuff
Here are few sneak peaks of what I'm doing
First is a seer council on jet bikes for Eldar army
Second are bits for Kromlech a wide variety of orc heads and other bits. Be sure to check it for more interesting stuff
Friday, April 22, 2011
Building gaming base
To build gaming base You will need :
cork
pva glue
super glue
plasti card 0,05 mm and 0,2 m
modeling knife
sanding paper
clippers
some bits from plastic kits
sand
First step is to break the cork into a base fitting fragments i used 2 slices to achieve desired height. make sure you have some rough edges and not a clean cuts. You can break or cut the desired shape.
glue the cork to the base using super glue
after the glue is dry it's time to cut the plasti card that will be fited on top of the cork platform. place the base onto the plasticard and draw the shape similar to the one of the cork platform then cut the shape using modeling knife/ clippersbe sure to sand the plasticard so that it can be glued without any problems
ater gluing the plasti card onto the base its time to do some cobblestone. I personaly use finished product and just glue it onto the base
i glued the pieces to the plasti card the i roughen up the edges using clippers to break away fragments that were extending over the originally build platform
When the main part was finished i decided to do a t-iron
It is 2 stripes of plasti card glued together using super glue
Then i cut one end of the tiron to fit desired angle and glued it to the base.
I decided to fit the base with dark eldar helmet to bring extra attention to the base.
When pieces were dry i applied some pva glue onto the cork and and plastic base using old brush
and applied sand.
Finished ! That was easy eh?
Here is the photo of finished base before its painted
To be continued..
cork
pva glue
super glue
plasti card 0,05 mm and 0,2 m
modeling knife
sanding paper
clippers
some bits from plastic kits
sand
First step is to break the cork into a base fitting fragments i used 2 slices to achieve desired height. make sure you have some rough edges and not a clean cuts. You can break or cut the desired shape.
glue the cork to the base using super glue
after the glue is dry it's time to cut the plasti card that will be fited on top of the cork platform. place the base onto the plasticard and draw the shape similar to the one of the cork platform then cut the shape using modeling knife/ clippersbe sure to sand the plasticard so that it can be glued without any problems
ater gluing the plasti card onto the base its time to do some cobblestone. I personaly use finished product and just glue it onto the base
i glued the pieces to the plasti card the i roughen up the edges using clippers to break away fragments that were extending over the originally build platform
When the main part was finished i decided to do a t-iron
It is 2 stripes of plasti card glued together using super glue
Then i cut one end of the tiron to fit desired angle and glued it to the base.
I decided to fit the base with dark eldar helmet to bring extra attention to the base.
When pieces were dry i applied some pva glue onto the cork and and plastic base using old brush
and applied sand.
Finished ! That was easy eh?
Here is the photo of finished base before its painted
To be continued..
Busy days
Hell it's a fine weather !
Pity i have to work.
I case You are wandering what i was doing all that time, I'm working on eldar army and starting few Golden Demon entries for this years German GD.
Here are few minis that i'll do between assembling and painting eldars
Hope to do them in different colors than usual and work more with metallic paints
Pity i have to work.
I case You are wandering what i was doing all that time, I'm working on eldar army and starting few Golden Demon entries for this years German GD.
Here are few minis that i'll do between assembling and painting eldars
Hope to do them in different colors than usual and work more with metallic paints
Thursday, March 24, 2011
Monday, March 21, 2011
First day of spring :)
Yeah spring in on the way and as usual i was struck by flu.
Not able to stray away from bed more then couple meters i'll enjoy this sunny day from bed.
Here is something for the soul
Keep on happy
painting ;)
Not able to stray away from bed more then couple meters i'll enjoy this sunny day from bed.
Here is something for the soul
Keep on happy
painting ;)
Sunday, March 20, 2011
Grey Knight Librarian
Never been a great fan of metallic paints, its an experiment for me.
We will see how it turns out
btw its really hard to make photos of reflective surface with my home camera :)
We will see how it turns out
btw its really hard to make photos of reflective surface with my home camera :)
Saturday, March 19, 2011
Ork Freebooter Warboss
Hello
Here are pics of the finished Freebooter Captain
You can see more angles as well as bigger picture here
Here are pics of the finished Freebooter Captain
You can see more angles as well as bigger picture here
Dracon Finished
Hi here are the photos of finished Dark Eldar Dracon
You can see more and better quality pics as well as rate him here
You can see more and better quality pics as well as rate him here
Wednesday, March 16, 2011
Wednesday, March 2, 2011
Dracon Update
Still not able to take a good photo with my home camera and without the proper light
but here it is
and also a black&white photo to show where and how strong are highlights on particular elements of the armor.
You can see that the main light source is from top left (model's) side so elements are painted in that way, but in order to bring extra focus to the points i like to be focal for mini are additional enlighten by surrounding elements
but here it is
and also a black&white photo to show where and how strong are highlights on particular elements of the armor.
You can see that the main light source is from top left (model's) side so elements are painted in that way, but in order to bring extra focus to the points i like to be focal for mini are additional enlighten by surrounding elements
Saturday, February 26, 2011
Dracon's sword WiP
This is the sword for the dracon i showed.
Still need few highlights & lining but thats the general idea how it would look
Still need few highlights & lining but thats the general idea how it would look
Thursday, February 24, 2011
Dark Eldar Dracon WiP
WiP of a Dracon I'm currently working on
And base he will be mounted on
I hope to finish him during next few days
After all those minis painted on a gaming level it's good to finally paint something on higher quality
And base he will be mounted on
I hope to finish him during next few days
After all those minis painted on a gaming level it's good to finally paint something on higher quality
Angel Sanguine Sanguinary Guard
I finished this model after almost 8 months
Hell it is about time to get rid of this guy, really annoying model
You can see more pics here
Hell it is about time to get rid of this guy, really annoying model
You can see more pics here
Wednesday, February 23, 2011
Urien Rakath finished
Finally managed to finish this model.
I will paint it again definitely although it's a real pain to assemble and paint
You can see more pics here
I will paint it again definitely although it's a real pain to assemble and paint
You can see more pics here
Monday, February 21, 2011
Urien Rakath
Just a WiP of Urien Rakath that I'm currently working on
and also the piece of music that is with me all the time when painting this model
Hope You like both mini and the music !
and also the piece of music that is with me all the time when painting this model
Hope You like both mini and the music !
Friday, February 18, 2011
Dark Eldar Duke Sliscus the Serpent
This model was real pain in the neck to finish...
Currently working on other models from this range ( Urien and Kabalite Firstborn)
You can see bigger photos here
Stay tuned for more models soon :)
Currently working on other models from this range ( Urien and Kabalite Firstborn)
You can see bigger photos here
Stay tuned for more models soon :)
Friday, January 21, 2011
The Newbold Challenge - rising money for charity
quote of Mr. Ian Newbold:
"The Newbold Challenge has raised just over £25,000 for charity (mainly Children in Need) since its inception 5 years ago. The 2011 Challenge will be attempting to add to this by raising around £5,000 for Children with Leukaemia.
The 1st Creative Event of the 2011 Challenge is now open for entries but doesn't close until 31 March 2011. As usual there are cash prizes for the winners and we'll make matching donations to Children with Leukaemia.
You can read up on the 2011 Challenge at :-
http://www.newboldworld.com/Challenge/TNC113.html
And you can read up on the few Event rules we have at :-
http://www.newboldworld.com/Challenge/TNC117.html
And finally you can view the early entries for the 1st Event of 2011 at :-
http://www.newboldworld.com/Challeng...011/index.html"
Lets do something to help !
"The Newbold Challenge has raised just over £25,000 for charity (mainly Children in Need) since its inception 5 years ago. The 2011 Challenge will be attempting to add to this by raising around £5,000 for Children with Leukaemia.
The 1st Creative Event of the 2011 Challenge is now open for entries but doesn't close until 31 March 2011. As usual there are cash prizes for the winners and we'll make matching donations to Children with Leukaemia.
You can read up on the 2011 Challenge at :-
http://www.newboldworld.com/Challenge/TNC113.html
And you can read up on the few Event rules we have at :-
http://www.newboldworld.com/Challenge/TNC117.html
And finally you can view the early entries for the 1st Event of 2011 at :-
http://www.newboldworld.com/Challeng...011/index.html"
Lets do something to help !
Thursday, January 6, 2011
Tzeentch Sorcerer
Started him ages ago.
It was a practice work to try out Bohun's technique on painting Gold.
I made few improvements here and there to fit it to my personal style.
in future i would like to make tutorial on how to achieve such effect.
Hope to finish him soon
It was a practice work to try out Bohun's technique on painting Gold.
I made few improvements here and there to fit it to my personal style.
in future i would like to make tutorial on how to achieve such effect.
Hope to finish him soon
Saturday, January 1, 2011
Brother Leon
Commission piece made for a collector.
Remake of my older work with few improvements here and there.
Hope You like him.
New works on the way.
Remake of my older work with few improvements here and there.
Hope You like him.
New works on the way.
Subscribe to:
Posts (Atom)